Prior to 1964, all Chevrolet and GMC Truck radios were unique and different from any car radio. In 1964 Chevrolet slightly modified the full size passenger car manual tune radio to fit the trucks. This radio was used through the 1966 model year. In 1967 and later years Chevrolet and GMC Truck radios were once again unlike any passenger car radio. The only difference between the 1964 Impala and the 1964-66 Chevrolet Truck radio is the tuning shaft bushing and the knobs. Although the Passenger cars had 3 radio options (Manual tuned AM, Push button AM and AM/FM), only the manual tune radios were used in the trucks.
The picture below shows the differences between an original Chevrolet Truck radio and our new AM/FM radio mounted in the same opening. To install, remove the outer knobs and the backrings. Remove the outer 7/16" shaft nuts (they are loose). Do not turn the inner 7/16" nuts. Position the radio through the dash opening and secure with the 7/16" nuts. Replace the backrings and the outer knobs. All other installation and operating procedures are the same as the instructions for the 1964 Impala.
Includes a 6 foot 3.5mm male-to-male auxiliary cable with every radio.
Bluetooth 3.0 EDR compliant
Built in microphone for HFP (hands-free profile)
HSP, A2DP, AVRCP profiles supported
Programmable audio equalizer
Place/answer calls or stream your favorite programs while maintaining original appearance!