|Add the convenience and reliability of a new column built specific for your GM Truck. This steering column is not a universal column that requires modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount, as well as the original floor mount. Using one of our installation kits install your new steering column in place of the old. Add an aftermarket wheel and the griping surface of the new wheel will be in the same location as the original. Deluxe Kits: Everything necessary to install your column with new parts from the column to the gearbox. All you need to know is the diameter of the gearbox input shaft and the number of splines. The below kits are sold separately so inquire with the correct year and applications.
Deluxe Kit includes: Coupler, Shaft, Rag Joint
Econo Kits: The Econo kit is designed for the builder with a budget in mind. The original rag joint and intermediate shaft are used. In the 1960-66 truck, the shaft will need to be cut and modified to match the 3/4” DD coupler. In the 1967-72, the original joint can be used with the ididit column. Remember the original rag joint is nearly 40 years old, so be sure to double check that it is in good condition. ididit, inc. always recommends replacement of the rag joint
Econo Kit includes: Coupler Only 1960-62 and 63-66 kits are different so specify year. 3/4" 36 Lower Shaft