Power Steering Conversion Kit for 1947-59 Chevy Truck
Includes brackets and instructions for adapting late model (1968-76 Chevy pickup 2WD) part # 76-931 power steering box (not included) to truck.
Places the steering box on the outside of the frame in front of the axle. steering shaft passes through the inner fender skirt after you make a small notch in the skirt at the bottom. Must order a Pitman Arm, Part# 76-986 and a u joint kit. If using the original steering column you must order a Conversion lower bearing 76-987.
Installable, but the front lower bolt is a pain. The first get I bought from POL in not installable-unless you have the front end off of the truck! My kit came with a bag of 3/8 x 1 bolts, washers and nuts which are incorrect. Needed are 4 - 7/16 x 2 grade 8 bolts and washers and lockwashers. The lower front bolt is very difficult to install in the middle of the front radiator crossmember. The spacers included are not long enough for the upper bracket- it barely touches the top of the frame-I highly recommend using your own longer spacers to place the bracket more on top of the frame- these are easily made from 1/2 pipe